Isotemp Water Heater - Basic 50L 230V/Heat Exchange
The Isotemp Basic 50 water heater is specifically designed for use in motorhomes & boats. Water can be heated via a 230V element or an internal heat exchange coil (using engine hot water). This marine grade water heater is made out of the highest quality materials.
Basic 50 Water Heater
The Isotemp water heater comes with brushed stainless steel cover as well as innovative internal design.
It achieves highest capacity by optimized installation of the engine water heat exchanger as well as the immersion heater.
On the hot water outlet, the thermostat mixing valve (also called a temping valve) will mix cold water with the hot output water to reduce the temperature to a safe level. This temperature is pre-set at 55 deg C, but can be easily adjusted with a knob on the side of the water heater. The 230V electric element it designed to keep the internal cylinder water at 70degC. If you are circulating the engine water (which can be around 92degC) through the heat exchange coils, the cylinder water temperature can get up to 85 deg C.
Features:
Extra long, corrugated coils for high heat exchange efficiency.
100 PSI safety valve.
Simple winterising drain.
Ultra-thick insulation for low temperature loss.
Plug & play electrical connection.
Immersion heating element also designed to heat the water at the bottom of the tank.
Built in thermostat mixing valve.
Specifications:
Weight: 23kg
Dimensions (mm): 760L x 395 diameter
Warranty: 2 years
Heat supply: 230V element (750W) and water heat exchange
Capacity: 50L
Construction Material:
Tank, engine water coil & all connections - AISI 316 (corrosion resistant stainless steel)
Outside cover and mounting feet - AISI 304 (stainless steel)
Electric immersion heater - Copper covered by Nickel
Insulation - Polyurethane
Water connections - 1/2” thread
| Weight | 23kg |
|---|---|
| Dimensions (mm) | 760L x 395 diameter |
| Warranty | 2 years |
| Heat supply | 230V element (750W) and water heat exchange |
| Capacity | 50L |
FOR ORDERS UNDER $399 VALUE:
Urban Delivery $9.90
Rural Delivery $14.90
FOR ORDERS OVER $399 VALUE: Free Delivery *
* We reserve the right to revise the free delivery offer on some bulky items (for example, a large fridge travelling to Te Anau). In this case, we will endeavor to offer a subsidized freight cost. If the delivery address is outside the North and South Islands (eg. Waiheke, Great Barrier, Stewart Islands), please contact us for a freight quote.
WE ONLY SEND ORDERS WITHIN NEW ZEALAND. If the delivery address is outside the North or South Islands (eg. Waiheke, Great Barrier, Stewart Islands), please contact us for a freight quote. Our automated online freight pricing only applies to North & South Island locations.
DELIVERY TIMES Due to the current outbreak, we are experience some disruptions to our normal service. Order dispatch and delivery times are being impacted by workforce sickness and isolation requirements for staff throughout our team and our supply chain. Although we use many courier options, the below NZ Couriers Network Status will give a good indication which regions are experiencing significant freight delays
https://www.nzcouriers.co.nz/network-status/
As a general rule, please allow an additional 3 working days for the below estimates (which may be extended by factors outside our control).
North Island (2-4 working days)
North Island Rural (3-5 working days)
South Island (2-5 working days)
South Island Rural (3-6 working days)
-
Shurflo High Flow Pump - 15 L/min, 55 PSISpecial Price $395.00 Regular Price $415.00
