Eternabond Double Stick

Eternabond Double Stick - 25mm wide

DoubleStick is an advanced MicroSealant with a removable siliconised release liner on each side. Designed to bond two surfaces, even two surfaces made of two or more dissimilar materials. Double- Stick creates a tight, permanent, waterproof seal. DoubleStick remains flexible to temperatures as low as -57°C making it virtually impossible to thermally shock the seal causing a leak.

What Doublestick Bonds To:
DoubleStick Bonds to a wide range of surfaces including EPDM, TPO, most PVC, CSPE/ Hypalon, CPE , SBS, APP modifieds, asphalt BURs, coal tar BURs, tiles, shingle, coated and non-coated aluminium and metal roofs, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fibreglass, brick, concrete, masonry, OSB board, shielding membranes, etc.

Basic Use:
DoubleStick tape is a self-sealing adhesive creating a water-tight, conformable seal between two or more irregular surfaces, and/or creates a weatherproof, permanent bond between two or more similar or dissimilar surfaces. Use as a lap seal, under the foot of a roof vent or window, or roll it into a bead or ball of MicroSealant to form a gasket, seal a hole or gap as needed.

Specifications:

DoubleStick utilizes EternaBond’s advanced MicroSealant Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber (non butyl) with a built-in primer, between two silicone release liners.

Length: 5.2m
Width: 25mm
Adhesion: 18.6kg/25mm width
Application temperature: 28.8° C to -28° C ambient