Camec Elite Pro 2 Caravan Mover
Camec Elite Pro 2 Caravan Mover Kit
Parking, hitching or de-hitching a caravan can be stressful, and costly if you get it wrong! The Camec caravan mover is an economical and effective solution for manoeuvring your caravan. A simple to use remote control engages the rollers and directs the caravan into any position required. Rotate the caravan through 360° degrees. Works on most surfaces in most conditions. Control when going up or downhill, control when hitching, control when unhitching.
Features:
Excellent Quality - E-coated and powder coated for corrosion-protection. All mover components are fully protected against water spray, dirt, and oil.
Safe and Reliable - The powerful motor will not allow the caravan to roll while being manoeuvred on a gradient. 2 way remote control technology provides anti-interference ability when there are other electronics transmitting close by. The caravan/trailer will stop automatically if it is out of the range of the remote control or there is a malfunction. Isolation switch to prevent accidental use of remote control.
Easy to operate - By simply pressing the button on the remote control, the rollers will automatically engage the tyres.
Soft Start - Soft start means no jerky movements. Accurately and safely manoeuvre your caravan to towing vehicle. The aluminium rollers are friendly to your tyres.
Very simple to fit and install. Suitable for almost any light-duty single axle chassis. Supplied as an installation kit with 2 movers (one for each wheel), mounting hardware, control box and remote control.
Specifications:
Operational Voltage: 12V
Average Current Draw: 30 Amps
Maximum Current Draw: 120 Amps
Speed: 11cm per sec.
Weight: 33kg
Minimum Width (caravan/trailer): 1800mm
Maximum Width (caravan/trailer): 2500mm
Maximum Tyre width: 205mm
Safe Working Load: 2000Kg reducing to 1750Kg on a 18% gradient (or with 4 movers for tandem axle, 3000kg reducing to 2350kg on a 18% gradient)
2-year warranty
Common Questions
Will the caravan mover fit my caravan?
The mover is suitable for L and U profiled chassis with a chassis thickness between min. 2.8mm and max. 3.5mm. It also comes with L shape chassis adapter plate which will bolt onto NZ/Australian chassis to allow easy installation. The ground clearance from the bottom of the chassis must be a minimum of 165mm. Please see the installation manual in the 'Downloads' tab.
Where is the best location for the mover?
The best location is in front of the axle. However, if this is not possible, it is usually possible to fit behind the axle.
Does it fit on a caravan with shock absorbers?
Yes.
FOR ORDERS UNDER $399 VALUE:
Urban Delivery $9.90
Rural Delivery $14.90
FOR ORDERS OVER $399 VALUE: Free Delivery *
* We reserve the right to revise the free delivery offer on some bulky items (for example, a large fridge travelling to Te Anau). In this case, we will endeavor to offer a subsidized freight cost. If the delivery address is outside the North and South Islands (eg. Waiheke, Great Barrier, Stewart Islands), please contact us for a freight quote.
WE ONLY SEND ORDERS WITHIN NEW ZEALAND. If the delivery address is outside the North or South Islands (eg. Waiheke, Great Barrier, Stewart Islands), please contact us for a freight quote. Our automated online freight pricing only applies to North & South Island locations.
DELIVERY TIMES Due to the current outbreak, we are experience some disruptions to our normal service. Order dispatch and delivery times are being impacted by workforce sickness and isolation requirements for staff throughout our team and our supply chain. Although we use many courier options, the below NZ Couriers Network Status will give a good indication which regions are experiencing significant freight delays
https://www.nzcouriers.co.nz/network-status/
As a general rule, please allow an additional 3 working days for the below estimates (which may be extended by factors outside our control).
North Island (2-4 working days)
North Island Rural (3-5 working days)
South Island (2-5 working days)
South Island Rural (3-6 working days)