Camec Water Heater - 13KW On Demand. Gas Only

Camec Digital Instantaneous Gas Water Heater

The new Camec 13Kw instantaneous gas water heater is now available with 30% more power than the previous model. The increased performance of the gas water heater provides continuous hot water with an increased water flow for daily use.

Benefits & Features

Designed specifically for RV use
Operates from Gas
Continuous hot water flow
Remote digital temperature controller with error code display and on/off switch
Up to 60% less gas consumption than regular tank models
No anode to replace
Easy to install and suits most existing water heater cut outs
Patented rain protection exhaust
Low power and gas usage
System stores the last selected water temperature setting even when powered on and off
Digitally monitors incoming water temperature, water flow and output temperature
Australian Gas and Watermark Approvals
Available with either a white or black door

Technical Specs

Dimensions (mm): 380W x 380H x 330D
Installation cut-out dimensions (mm): 320W x 320H x 380D
Weight: 12.1kg
Gas Type: Universal LPG
Nominal Gas Consumption: 49.14 MJ/h
Supply Gas Pressure: 2.75 kPa
Maximum Gas Input: 13.65kW
Supply Voltage: 10.5 to 15.0 VDC
Maximum Current: 1.5A
Minimum Water Flow Rate: 1.5 L/min
Selectable Water Temperature: 35-60 degC
Water Heating Capacity: Temperature rise of 37.7 degC is at 5 litres per minute. Higher flow rates will result in less temperature rise.
2 Year Warranty

NOTE ON PERFORMANCE: Hot water performance depends on a number of factors such as input water temperature, water flow rate, plumbing pipe length and desired water temperature. This water heater is capable of providing a 37.7 degC temperature rise with at a 5 L/min water flow rate. This means with an input water temperature is 11 degC, the max output water temperature will be 48.7 degC (at flow rate of 5L/min). Since the water is heated by flowing through a pipe which weaves backwards and forward pipes over a gas flame, by decreasing the water flow rate at your tap/shower head, the water will stay in the heating pipes for longer and get hotter. Inversely, by increasing the flow rate, the water will come out cooler. It is recommended that a low flow shower head is used, which provides an important water saving feature, especially when free camping. The heater works best with supply flow rate no more than 8-9L/min. If you pump delivers more than this, add a water flow reducer like the WaterWizz 9L/min reducer which is readily available from Mitre10. Although it should work well in summer, in cooler times of the year it may not provide the same water heating ability as a household shower.

NOTE: Installation of this product must comply with the requirements of AS/NZS 3500.4 
Installation and service must be performed by a qualified gas fitter